07836 673 753 lifts@hotmail.co.uk

Bespoke 50 & 100 kg Dumbwaiters / Food Lifts

Compact, flexible, but quick and easy to install and use.

Bespoke 50 & 100 kg Dumbwaiters / Food Lifts

Compact, flexible, but quick and easy to install and use. On top of this you get what you can expect from a machine that is designed and manufactured in Germany.

  • Over 100,000 have been manufactured.

BKG dumbwaiters are high-level quality in combination with a long-term reliability that has no equal. They are the true all-rounder, to move small to medium-sized goods and are regarded inside the lift trade as the best and the most reliable dumbwaiters on the market. All service lifts are manufactured based on the current machinery directive 2006/42/EC in combination with the harmonized standard EN 81-3.

11 + 7 =

  • Capacity 50 – 100 kg
  • Car width: 350 to 1000 mm
  • Car depth: 320 to 1000 mm
  • Car height: 600- 1200mm
  • Up to 3 entrance sides
  • Landing doors are sliding, bi – parting.
  • Doors are at waist height and can be set to any serving height.
  • Motor position is at the top, inside the lift shaft.
  • Nominal speed from 0,2 to 1.0 m/s
  • Optionally safety gear for when there is accessible space below the shaft.
  • Doors can be at floor level height.
  • Motor room can be at the bottom floor inside the lift shaft.
  • Motor room can be at the side of the lift shaft, at any floor.
  • Rated power max. 1.5 kW (Top or bottom drive) 3.0 kW (Side drive)
  • Car and Landing doors can be Zintec steel for individual painting by the customer after installation, Galvanised Steel, Stainless Steel, Powder Coated to any shade or Glass.
  • Galvanized self-supporting structure for quick and easy installation by pre-assembled components
  • Motor with compact worm gear
  • Plug-and-play microprocessor controls, completely pre-wired, low voltage engineering
  • Call and send control with floor position indicator
  • Call acknowledgement and arrival buzzer
  • Fault Diagnostic system
  • Full documentation, operation manual, engineers drawing with every installation plus CE Marking.
  • Up to 30 floors / stops
  • Travel up to 120 m
  • Shaft doors fire-rated acc. EN 81-58 (E120, EW60, EI90)
  • VVVF drive
  • Car and shelf heaters
  • LED car lighting
  • LED shaft lighting
  • Overload device
  • Automatic shaft doors
  • Intercoms
  • Ship and offshore lifts
  • Water/dust protection (IP)
  • Other tailor-made solutions on request

Specification

Capacity 50 – 100 kg
Car width 350 to 1000 mm
Car depth 320 to 1000 mm
Car height 600- 1200 mm
Up to 3 entrance sides
Landing doors are sliding, bi – parting
Doors are at waist height and can be set to any serving height
Motor position is at the top, inside the lift shaft
Nominal speed from 0,2 to 1.0 m/s
Optionally safety gear for when there is accessible space below the shaft
Doors can be at floor level height
Motor room can be at the bottom floor inside the lift shaft
Motor room can be at the side of the lift shaft, at any floor
Rated power max. 1.5 kW
Top or bottom drive 3.0 kW (Side drive)
Call and send control with floor position indicator
Call acknowledgement and arrival buzzer
Fault Diagnostic system
Full documentation, operation manual, engineers drawing with every installation plus CE Marking
Up to 30 floors / stops
Travel up to 120 m
Shaft doors fire-rated acc. EN 81-58 (E120, EW60, EI90)
VVVF drive
Car and shelf heaters
LED car lighting
LED shaft lighting
Overload device
Automatic shaft doors
Intercoms
Ship and offshore lifts
Water/dust protection (IP)
Other tailor made solutions on request
Car and Landing doors can be Zintec steel for individual painting by the customer after installation, Galvanised Steel, Stainless Steel, Powder Coated to any shade or Glass
Galvanized self supporting structure for quick and easy installation by pre-assembled components
Motor with compact worm gear
Plug-and-play microprocessor controls, completely pre-wired, low voltage engineering